Sanyo MultiMedia PLC-XR251 XGA Projector With 2600 Lumens

Introducing the Sanyo Multi-Media Projector PLC-XR251 – that offer educators outstanding cost performance with an eco stand-by power mode that uses a mere 0.4 watts and their exclusive “Easy Setup Function”. These projectors are extremely easy to operate and offer advanced features such as wired LAN management – making them perfect for educators. 

Auto Set Up Function, Closed Captioning (NTSC) decoder, 1 RGB Input 1RGB input/Output, Power Off and Go

Using a mere 0.4 watts, the PLC-XR251 is one of SANYO's most ecological data projectors. The eco power stand-by mode saves about 80% of the energy that is consumed by similar previous SANYO projectors*. By redesigning the electrical circuits, these two projectors are able to comply with the EuP-Directive Lot 6 and the EU RoHS Directive. As an additional environmental measure, all the packaging contains pulp molds, which can be recycled as used paper.

Both projectors incorporate SANYO's latest “Easy Setup Function”, which include Auto Input Signal Search, Auto Vertical Keystone Correction, and an Input Guidance Function. The Auto Input Signal Search automatically detects the input signal and makes the necessary internal settings. The Auto Vertical Keystone Correction function automatically detects its position angle and corrects for any image distortion. And finally, the Guidance Function displays on-screen connection instructions when there is no input signal detected, enabling easy setup for expert users and novices alike.

Using the supplied wired LAN terminal (RJ-45), the PLC-XR251 can be controlled and managed via network connection. The LAN connection offers settings for power on/off, switching input signals, projecting from a remote location, as well as for monitoring lamp conditions and usage time. An automatic maintenance notification function sends notices to preset email addresses in the event of projector problems, resulting in faster maintenance response time. Using SANYO’s PJ Network Manager software, it's possible to centrally monitor operating conditions of up to 200 projectors on a single network, reducing multiple projector management time.